CO₂ Incubators Water or Air Jacketed

• Stainless steel interior and shelves
• Models with water or air jacket
• Benchtop, floor and high capacity models with chamber capacities from 42 to 1092 litres
• Temperature range (depending on model): Ambient + 8 °C to 60 °C; Ambient + 5 °C to 50 °C
• CO₂ range: 0 - 20 %, infrared CO2 sensor
• CO₂ recovery rate: < 5 minutes
• Independent overtemperature thermostat, overtemperature and CO₂ alarm
• Relative humidity (passive) up to 95 %
• Models with dry heat decontamination cycle, copper shelves or copper coated HEPA filters available

Drosophila Incubators

• Require up to 70 % less power than compressor based models
• Day/night controls with LED lighting to provide an excellent environment for Drosophila culture
• Temperature range: 15 °C to 40 °C (at 20 °C ambient)
• Overtemperature alarm, door ajar alarm
• Digital display
• Overtemperature thermostat
• 1 interior electrical outlet
• Models with 185 l or 546 l chamber capacity

High Performance Ovens

High performance forced air ovens:

• For continuous drying operations
• Horizontal air flow, heated air is continuously circulated
• Independent overtemperature safety feature
• Three adjustable air intake and exhaust ports
• LED display

Ovens with programmable Watlow controller:

• Temperature range: 15 °C above ambient to 306 °C
• Data logging capabilities via RS485
• 1 door

Ovens SMO14HP-2, SMO38HP-2 (with 2 doors):

• Programmable Juno dTRON controller (max. 27 steps)
• 2 doors

Oven for Cleanrooms

• For high temperature cleanroom work
• Stainless steel interior and exterior
• Temperature range: 20 °C above ambient to 270 °C
• Rapid heat recovery: 6 minutes to reach 150 °C
• Programmable Watlow Controller
• 3 adjustable air intake and exhaust ducts, easily removed for cleaning, allow use of either room or circulated air
• Supplied with nitrogen inlet port, high-temperature silicone door gasket, and HEPA filter
• Chamber capacity: 110 l

Ovens (forced air or gravity convection)

Forced air ovens:

• Horizontal air flow
• Temperature range: Ambient + 20 °C to 306 °C
• Independent overtemperature safety feature
• Digital timer
• 1 access port
• 39 l, 86 l or 139 l chamber capacity

Large forced air ovens:

• Horizontal air flow
• Temperature range: Ambient + 15 °C to 260 °C
• Independent overtemperature safety feature
• Digital timer
• Adjustable exhaust port
• 387 l or 781 l chamber capacity

Gravity convection ovens:

• Gravity convection air flow
• For work with powders, granulated and light materials
• Temperature range: Ambient + 15 °C to 225 °C
• Digital timer
• 97 l or 141 l chamber capacity

Peltier Cooled Incubators

• Require up to 70 % less energy than alternative models
• Temperature range: 15 °C to 40 °C (at 20 °C ambient)
• Overtemperature alarm, door ajar alarm
• 1 interior electrical outlet
• Models with 99 l, 185 l or 546 l chamber capacity

Roll-In Large Capacity Incubators

• With rails for Roller Apparatus
• Extra large, with tempered glass viewing window
• Stainless steel interior and shelves
• Air jacketed
• Overtemperature alarm
• 1 interior electrical outlet
• 1 access port

Units with CO₂ feature:

• Temperature range: Ambient + 8 °C to 60 °C
• CO₂ range: 0 - 20 %
• Infrared CO₂ sensor
• CO₂ recovery rate: < 5 minutes
• Models with 879 l, 1125 l und 1641 l chamber capacity

Units without CO₂ feature:

• Temperature range: Ambient + 8 °C to 70 °C
• Models with 872 l and 1092 l chamber capacity

Shaking Water Baths

• Smooth reciprocal shaking motion: 20 - 200 rpm
• Adjustable stroke length: 1.2, 2.5 or 3.8 cm
• Also usable without shaking operation
• Temperature range: ambient + 5 °C to 80 °C
• 17 or 27 litres tank capacity
• Independent oscillation and temperature controls
• Supplied with stainless steel gable cover and shaking platform
• Flask holders available on request

Standard Incubators

• Temperature range: ambient + 8 °C to 70 °C
• Capacity (depending on model): 56 - 326 litres
• Single and stacked models
• Stainless steel interior and shelves
• Triple wall construction
• Air jacketed
• Heated outer door, inner glass door
• Overtemperature alarm
• 1 interior electrical outlet
• 1 access port

Vacuum Ovens

• Programmable Watlow-Controller
• Stainless steel interior
• RS485 communication port
• End vacuum: 10 ΜmHg (10 mTorr, 0.0013 kPa, 0.0133 mbar)
• Heat-up time: 120 minutes to 150 °C

Standard ovens:

• Temperature range: Ambient + 10 °C to 220 °C
• Temperature adjustable in 0.1 °C increments
• Different vacuum units available
• Tempered glass viewing door

Large capacity oven:

• Temperature range: Ambient + 15 °C to 220 °C
• Stand with built-in vacuum pump mount
• Stainless steel exterior option available for clean room applications

Chambers for Anaerobic and Hypoxic Applications

• 5 different models with patented, glove free sample handling using comfortable sleeve cuffs
• Stainless steel body with acrylic glass front for an unobstructed view of the interior workspace
• Separated incubator and working space
• Temperature range: ambient +5 °C to 70 °C
• All models with 1 interior electrical outlet
• User-friendly control panel
• Easy to handle air-lock for simple transfer of samples

BACTRON: Chambers for Anaerobic Applications

• Automatic pressure control provides a mild overpressure
• Internal manometer for a quick, visual check of pressure level to ensure correct handling
• Palladium catalyst cartridge improves anaerobic efficiency

BACTROX: Chamber for Hypoxic Applications

•  Independent control of O₂ from 0,5 % to 20 % and CO₂ from 1 % to 20 %, in 0.1 % increments each
• Immediate access to workspace via sleeves (no vacuum system or foot pedals)

NEW!  Bactron 400HP – High Performance anaerobic chamber

• Incubator capacity: 400 plates / Airlock capacity: 216 plates
• Programmable automated airlock cycles (up to 9 cycles)
• HEPA filtration of workspace and incubator (ISO class 3 standard)
• Oxygen sensor (O₂) and Relative Humidity sensor (RH)
• Touch-Screen with high resolution multi-colour display
• Simultaneous display of relevant process data and logging to SD Card
• Catalyst with integrated activated carbon prefilter
• KF40 Expansion Port for cable pass-through
• Single plate entry system
• Hinged front flange for easy loading of lab devices and supplies and easy cleaning of workspace and incubator